AP Smart IR sensor unit uses infrared sensing technology to detect the presence of all types of mash and pellet feeds.  It is designed to be used in place of a proximity switch or drop tube switch and will operate with or without the aid of a power relay. The sensor is installed underneath a control unit between the powerhead drop (funnel) and the drop tube at the end of a flexible auger feed system.

Features:

• Digital display and push button interface allows quick, precise adjustments, with easy-to-see system status LEDs
• Push-button programming to adjust max run time & delay time
• 230 Volts, compatible with 1 PH and 3 PH Flex-Flo Control Units
• Motor Contact, 20 amp dry contact/Maximum 1.5 HP @ 230 Volts
• Alarm Contact, 1 amp/125 V dry contact – can be wired to your Agri-Alert or other on site alarm system.
• On delay timer delays the restart of the feed system from 0 minutes to 24 hrs
• Maximum run timer adjustable from 1 min to 24 hrs
• Over Current Protection, PPTC Auto Reset Fuses – requires no sensitivity adjustment.
• 42″ Cord, 16 AWG/5 Conductors
• Inlet has a 2.4″ ID & Outlet has a 3.5″ OD
• Dimensions: 12″ H x 6.4″ W x 7.5″ D
• Weight: 6 lbs
• Not affected by changes in the temperature, humidity, moisture content or feed type
• Sensor can be installed on all makes of flexible auger feed delivery systems without modifications
• Not affected by changes in temperature, humidity, moisture content or feed.
• Includes 4 self-tapping screws to attach to drop cone and drop tube at installation.